GENERAL DESIGN SPECIFICATIONS
- A .25 inch no live area "MUST" be allowed for cutting purposes.
- The size of the printed piece will be the same as the document size listed under ..Page Setup in the application program. Jobs will be cut down about 1/16" to ..original size.
- Front and Back of document should be setup as two separate pages, do not create ..both sides in a single file or page.
- Files should be setup at a minimum of 300dpi resolution.
- Files must be saved in CMYK format.
- All solid Black areas should be composed as a combination:
. CYAN 50%, MAGENTA 50%, YELLOW 50%, and BLACK 100%.
..If your job needs to be in grey tones, you must have no "CYAN, MAGENTA, or ..YELLOW" in your channels. A perfect grey would be: CYAN= 0%, MAGENTA=0%, ..YELLOW=0%, and BLACK= 50%.
..
..If you need a grey to be lighter or darker, it would be determined by the amount of ..black you add to your black channel.
PROOFING
By the time your job is received, all edits should be finalized, the copy carefully proofread and all design issues should be settled. We are not responsible for proofing any submitted jobs and we will not take any responsibility for any copy or design errors committed on your part after submission of work.
|